Site Search
Product Index
Design Assistance

 

Alpine® Redi-Master®

GEAR REDUCED HOIST DOOR OPERATOR

 

FEATURES AND CHARACTERISTICS


ELECTRICAL FEATURES
»UL listed.
»High starting torque, continuous duty industrial motor.
»Motor overload protection Low voltage control circuit, 24 VAC.
»NEMA 1 control station with OPEN/CLOSE/STOP.
»Type C2 wiring standard.
»The limit adjustments are made with a linear driven, fully adjustable screw type cams.

»Optional Reversing Edge is made up from an electric or pneumatic sensing device which is attached to the bottom edge of the door.

»Motor Voltage listed as 115, 220, 230 at Single Phase. Also, 230, 460, and 575 at Three Phase.

MECHANICAL FEATURES
»Heavy Duty bronze worm gear reducer. 40:1 Reduction.
»Output shaft speed is rated at 43 RPM.
»Door speed is between 4-10 inches per second of travel.
»Hoist wheel is mounted on either the left or right side.
»The optional clutch is the adjustable torque limiter type.
»Safety enhanced by the use of a floor level chain hoist equipped with an electrical interlock for emergency manual door operation.


 

Contact us today to find out which Alpine® solution is right for you!

 


A PERFECT

CHOICE

FOR

GEAR REDUCED

HOIST DOOR

OPERATOR

FOR


ROLLING


DOORS

 

Disclaimer: All data provided on this website is to be used for information purposes only, and is subject to change without prior notice. Alpine shall not be liable for technical or editorial errors or ommisions contained herein, nor for direct, incidental, consequential or any other damages resulting from furnishing, performance, or use of this information, even if Alpine Overhead Doors, Inc. has been advised of the possibility of such damages in advance. See the additional disclaimer in our Terms of Use.