   Alpine®
Auto Fire-Shut®
Advanced
Counter Fire Doors
 Fire
Rated Counter Shutter; U.L. Classified
to 3 Hours of Protection - Ideal For All Pass-Thru Openings
Such as Service Counters, Concession
Stands and Cafeteria Counters.
- Shutter Coils Upward Requiring
Little Side or Head Room.
- Built in Accordance with Requirements
Specified by Underwriter's Laboratories
Inc.
 |
3 Hour
Approved for Doors in Dividing Fire Walls
with Openings
not Exceeding 152 sq. ft. in area. • 1.5
Hour Approved for Doors, in Vertical Shaft
Openings not Exceeding 152 sq. ft. in area. • .75
Hour Approved for Doors in Corridor or
Room-Partition Opening not Exceeding 152 sq. ft.
in area. • 1.5
Hour Approved for Doors in Exterior Wall
Opening not Exceeding 120 sq. ft. in area.
The
Auto Fire-Shut® has the same features as the
Fire-Shut® with controlled automatic closing
by one of Alpine's Redi-Reset® Motors, hand
chain or hand crank options. The Auto Fire-Shut® can
be connected to smoke detectors and
fire alarms as well as any building
alarms. The Redi-Reset® operators
eliminate the complication of a manual
reset of the door after drop testing
or activation. The Auto Fire-Shut® is also
labeled for up to 3 hours of fire protection
by UL and NYC MEA approved.
Alpine Auto Fire-Shut® curtains are available
in either 1 1/4" flat or 2" curved interlocking
slats. Shutters can be manually or motor
operated. Operators can be adapted
to specific conditions. Locking units
can be provided depending on the type
of shutter operation.
APPLICATION USE
Fire Protection, Counter Fire, Counter Shutter, Cafeteria’s, Medical Facilities, Office Windows.
BOTTOM BARS
Galvanized, Stainless Steel, Hot Rolled Steel, Powder Coated, Strip Seal, Pneumatic Edge,
Electric Edge, Wireless Edge, Double Angle, Tubular, Slide Lock.
BRACKET PLATES
Hot Rolled A36, Stainless Steel, Galvanized, Powder Coated, Internal Charge, Charge Wheel,
Motor Prep., Chain Gearing, Thru-Wall Drop Plate, Round Bracket, Square Bracket, Hex Bracket,
Single Gear Reducer.
COUNTERBALANCE ASSEMBLY
Hot Rolled A36, Galvanized, Stainless Steel, Torsion Spring, Life Cycle 10M, Life Cycle 15M, Cycle
17.5 to 400M, Welded Tabs, Taped Holes, Inside Charge, Lock Shaft Collar, Keyed, Bolted.
CURTAIN OPTIONS
Galvanized, Stainless Steel, Prime Painted Galvanized, Powder Coated, Stamped
Endlock, Cast Endlocks, Windlock Option.
GUIDE MATERIAL
Hot Rolled A36, Stainless Steel, Galvanized Steel, Powder Coated, Roll Formed Angles, “G” Shutter
Guide, Chain Lock Box, Electric Interlock, Tube Mounting.
HOOD/COVER
Galvanized, Stainless Steel, Prime Painted, Powder Coated, Flame Baffle, Lintel Seal,
Smoke Lintel Seal, Back Fascia, Tension Cover, Operator Cover, Round, Square, Side End Cap,
Motor Cover, T.O.C. Cover, F.O.C. Cover, F.O.W. Cover.
MATERIAL STYLE
22 Gauge, 20 Gauge,18 Guage.
OPERATION OF DOOR
Chain, Motor, Hand Crank, Redi-Reset Chain II, Grifco Chain, Redi-Reset Chain, Redi-Reset Crank,
FDC Operator, FDCL Operator, Reset MM Operator.
Contact
us today to find out which Alpine® solution
is right for you!
|
| Powder
Coating |
 |
|
 Our
large selection of colors
make our doors decorative
and durable.
|
| Standard
Colors |
| View | Download |
| Special
Effects |
| View | Download |
|
|
|
1
1/4" Flat or 2" Curved
Slat
|
|
|
Roll Formed Double
Angle Bottom Bar
|
|
|
Formed Guide
|
|
