|
   Alpine®
Fire-Tite®
'
Rolling Overhead Fire Doors
Traditional
Design
 High
Quality Rolling Metal Fire Door at a Competitive
Price - Optional Internal Flame Baffle
Prevents Infiltration Thru Header
- Approved for Rolldown Stainless Steel Fire
Doors
- Certificate up to 56'x30'
- Built in Accordance with Requirements
Specified by Underwriter's Laboratories
Inc.
|
Fire-Tite is also available as an interior industrial insulated door.
Available
Classifications:
4 HR, 3 HR, 1 1/2 HR, 1 HR and 3/4 HR Underwriters' Laboratory (UL) labels
3 Hour Approved (optional 4 Hour) for Rolling fire doors and roll up fire shutters in dividing fire walls with openings not exceeding
152 sq. ft. in area. • 1.5 Hour Approved for
rolling metal fire door, in vertical shaft openings
not
exceeding 152 sq. ft. in area. • .75
Hour Approved for rolling fire doors and interior or exterior fire shutters in corridor
or room-partition
opening not exceeding 152 sq.
ft. in area. • 1.5 Hour
Approved for rolling fire doors in exterior
wall opening
not
exceeding 152 sq. ft. in area. |
Alpine's Rolling Overhead Fire Doors are tested & approved for the
protection of openings in fire walls, vertical
shafts and exterior walls up to 152 sq.ft. with a
maximum
width or height of up to 13ft 6in For openings
that exceed these limitations, an oversize label
is available for Rolldown door sizes up to 56' in width
and 30'
in height.
Fire-Tite® curtains are
constructed of galvanized steel in
2 3/4" flat, 3"
curved, and 4" curved slats, and
can be finished with powder coating or
baked enamel finishes. Each rolling fire door, exterior fire shutters and roll up fire shutters is
equipped with a 22 gauge steel hood
formed to fit the contour of the end
brackets. Durable ductile iron with 1/4"
semi-solid rivets, hot dipped end locks and wind locks are available. Our
rolling fire door supports and brackets are all
steel plates no less than 1/4" thick.
Alpine's Torsion Counterbalance
Assembly is state of the art, providing
maximum security and ease of use.
APPLICATION USE
Fire Protection.
BOTTOM BARS
Galvanized, Stainless Steel, Hot Rolled Steel, Powder Coated, Strip Seal, Pneumatic Edge, Electric Edge, Wireless
Edge, Double Angle, Slide Lock.
BRACKET PLATES
Hot Rolled A36, Stainless Steel, Galvanized, Powder Coated, Viscous Governor, Oscillating Governor, Fire Drop Charge,
Charge Wheel, Motor Prep., Chain Gearing, Thru-Wall Drop Plate, Round Bracket, Square Bracket, Hex Bracket, Single
Gear Reducer, Double Gear Reducer.
COUNTERBALANCE ASSEMBLY
Hot Rolled A36, Galvanized, Stainless Steel, Torsion Spring, Kicker, Cycle 17.5M to 400M, Collars, Welded Tabs, Tapped
Holes, Lock Shaft Collar, Keyed, Bolted.
CURTAIN OPTIONS
Galvanized Steel, Stainless Steel, Prime Painted Galvanized, Powder Coated, Stamped Endlock, Cast
Endlocks, Windlock Option, Brass End Lock.
GUIDE MATERIAL
Hot Rolled A36, Stainless Steel, Galvanized Steel, Powder Coated, Structural Angles, Rolled Formed Angles, Chain Lock
Box, Electric Interlock, Tube Mounting, Pack Out Angle.
HOOD/COVER
Galvanized, Stainless Steel, Prime Painted, Powder Coated, Flame Baffle, Lintel Seal, Smoke Lintel Seal,
Tension Cover, Operator Cover, Back Fascia, Round, Square, Hex, Side End Cap, Motor Cover, T.O.C. Cover, F.O.C.
Cover, F.O.W. Cover.
MATERIAL STYLE
22 Gauge, 20 Gauge, 18 Gauge.
OPERATION OF DOOR
Push-Up, Chain, Motor, Hand Crank, Redi-Master, Redi-Hoist, Redi-Lift, Chain Gear Reducer, Redi-Release.
Fire-Tite rolldown overhead metal fire door is built tough and easily fire drop tested. For your window needs click to see our line of roll up fire shutters. We also carry interior and exterior fire shutters, insulated and industrial Fire doors.
Click
Here for UL Labeled Smoke and Draft
Control Assemblies
Contact
us today to find out which Alpine® solution
is right for you! |
| Fire
Test |
 |
|
|
See for yourself
how Alpine® Fire
Doors handle the heat. Click
here for some
pictures from one
of our recent fire
tests.
|
|
|
|
|
| |
|
| Powder
Coating |
|
|
 Our
large selection of colors
make our doors decorative
and durable.
|
| Standard
Colors |
| View | Download |
| Special
Effects |
| View | Download |
|
|
|
2
3/4" Flat, 3" or 4"
Curved
Slat
|
|
|
Double
Angle Bottom Bar
|
|
|
Structural Guides
|
|
