Alpine®
Insulated Rolling Doors
Vibration
Resistant Insulation
- Insulated
Rolling Doors with Metal Backing.
- Increased Thermal Protection, Fully Weatherstripped.
- R-Value of 8.0
- 7/8"
Thick Polystyrene
- Optional Polyurethane Insulation
|
 |
In
these times of rising energy costs,
Alpine recognizes the need for better
protection against the elements. To
help combat the problem, Alpine offers
our IMB insulated rolling door design.
IMB-V7® is
designed
specifically to provide energy efficiency,
utilizing a heat resistant polystyrene
insulation with a low thermal transmittance factor.
The metal on metal insulated slat has polystyrene
insulation that is a minimum of 7/8" thick.
Slats are available in 22,
20, 18, and 16 gauge steel with a backing
of 24, 22, or 20 gauge steel and also available in B.S.
Aluminum. Polystyrene slat insulation offers
maximum thermal protection.
Insulated rolling doors can be push-up, hand-crank, hand-chain or motor operated. All operators can be adapted to specific conditions.
APPLICATION USE
Insulated, Loading Dock Doors.
BOTTOM BARS
Brass, Copper, Galvanized, Aluminum, Stainless Steel, Hot Rolled Steel, Powder Coated, Weather
Strip, Brush/Smoke Seal, Pneumatic Edge, Electric Edge, Wireless Edge, Double Angle, Tubular,
Extruded “T”, Slope Bar, Curb Closure Plate, Special Cut-Out, Slide Lock.
BRACKET PLATES
Brass, Copper, Hot Rolled A36, Stainless Steel, Galvanized, Powder Coated, Stop Lock Bearing,
Internal Charge, Charge Wheel, Motor Prep., Chain Gearing, Thru-Wall Drop Plate, Round Bracket,
Square Bracket, Hex Bracket, Single Gear Reducer, Double Gear Reducer.
COUNTERBALANCE ASSEMBLY
Hot Rolled A36, Galvanized, Stainless Steel,
Torsion Spring, Life Cycle 17.5 to 400M, Welded Tabs, Taped Holes, Redi-Tube Motor,
Thru-Shaft Push-up, Inside Charge, Lock Shaft Collar, Keyed, Bolted.
CURTAIN OPTIONS
Brass, Copper, Galvanized, Stainless Steel, Aluminum, Galvalume, Prime Painted Galvanized,
Powder Coated, Mail Slot, Vision Lite, Stamped Endlock, Cast Endlocks, Windlock Option, Brass
Endlock, Teflon Endlock, Pass Door.
GUIDE MATERIAL
Brass, Copper, Hot Rolled A36, Stainless Steel, Aluminum, Galvanized Steel, Powder Coated,
Structural Angles, Roll Formed Angles, Weather Stripping, Brush/Smoke Seal, Chain Lock Box,
Electric Interlock, Heat Tracing, Teflon Lining, Tube Mounting, Pack Out Angle, Flat Plate Mount.
HOOD/COVER
Brass, Copper, Galvanized, Stainless Steel, Aluminum, Galvalume, Prime Painted, Powder Coated,
Hood Baffle, Lintel Seal, Smoke Lintel Seal, Back Fascia, Tension Cover, Operator Cover, Round,
Square, Hex, Side End Cap, Motor Cover, T.O.C. Cover, F.O.C. Cover, F.O.W. Cover.
MATERIAL STYLE
24 Gauge, 22 Gauge, 20 Gauge, 18 Gauge, Polystyrene Board, Polyurethane Foam.
OPERATION OF DOOR
Chain, Motor, Hand Crank, Redi-Master, Redi-Lift, Chain Gear Reducer, Euro-Drive.
Contact
us today to find out which Alpine® solution
is right for you!
|
| Powder
Coating |
 |
|
Our
large selection of colors
make our doors decorative
and durable.
|
| Standard
Colors |
| View | Download |
| Special
Effects |
| View | Download |
|
|
|
IMB-V7
Curtain Detail
|
|
|
Double
Angle with
Rubber Astragal
|
|
|
Structural
Guide with
Weather Strip
|
|
|