Alpine® Steel-Vision®
Perforated
Rolling Doors
- Enjoy the benefits of a see-through
design with comfort and security.
- Steel Vision Doors can be Motor
or Manually Operated.
- Accents the Appearance of Doors
& Enhances Building Decor.
|
 |
Alpine's
Steel-Vision® Perforated Doors offer a clean,
uncluttered view, eliminating the claustrophobic
effect of being "closed-in". Steel-Vision®
Doors are available in a variety of
sizes and finishes, and are made of
heavy gauge steel, making them both
safe and secure.
Alpine Steel-Vision® curtains come with either
2 3/4" flat slats interlocking slats. Doors
can be manually or motor
operated. All operators can be adapted
to specific conditions. Locking units
can be provided depending on the type
of door operation. Alpine rolling steel
doors are durable, sturdy and economical
to install and maintain.
APPLICATION USE
Store Front Door, Office Window, Loading Dock Doors, Mall Rolling Doors, Ventilation, Display Case.
BOTTOM BARS
Brass, Copper, Galvanized, Aluminum, Stainless Steel, Hot Rolled Steel, Powder Coated, Weather
Strip , Pneumatic Edge, Electric Edge, Wireless Edge, Single Angle, Double Angle, Tubular,
Extruded “T”, Slope Bar, Slide Lock.
BRACKET PLATES
Brass, Copper, Hot Rolled A36, Stainless Steel, Aluminum, Galvanized, Powder Coated, Stop Lock
Bearing, Internal Charge, Charge Wheel, Motor Prep., Chain Gearing, Thru-Wall Drop Plate, Round
Bracket, Square Bracket, Hex Bracket, Single Gear Reducer, Double Gear Reducer.
COUNTERBALANCE ASSEMBLY
Hot Rolled A36, Galvanized, Stainless Steel, Torsion Spring, Band Spring, Life Cycle 7.5M, Life
Cycle 10M, Life Cycle 15M, Life Cycle 17.5M thru 400M, Collars, Welded Tabs, Taped Holes, Redi-
Tube Motor, Thru-Shaft Push-up, Inside Charge, Lock Shaft Collar, Keyed, Bolted.
CURTAIN OPTIONS
Galvanized, Stainless Steel, Aluminum, Powder Coated, Perforated, Mail Slot, Stamped Endlock,
Cast Endlocks, Windlock Option, Teflon End Lock.
GUIDE MATERIAL
Brass, Copper, Hot Rolled A36, Stainless Steel, Galvanized Steel, Powder Coated, Structural Angles,
Roll Formed Angles, Chain Lock Box, Pin Locks, Loc-Tite Locks, Electric Interlock, Tube Mounting,
Pack Out Angle, Flat Plate Mount.
HOOD/COVER
Brass, Copper, Galvanized, Stainless Steel, Aluminum, Galvalume, Prime Painted, Powder Coated,
Lintel Seal, Back Fascia, Tension Cover, Operator Cover, Round, Square, Hex, Side End Cap, Motor
Cover, T.O.C. Cover, F.O.C. Cover, F.O.W. Cover.
MATERIAL STYLE
22 Gauge, 20 Gauge.
OPERATION OF DOOR
Push-up, Chain, Motor, Hand Crank, Redi-Master, Redi-Hoist, Redi-Lift, Redi-Tube, Chain Gear
Reducer, Euro-Drive.
Contact
us today to find out which Alpine® solution
is right for you!
Disclaimer: All data provided on this website is to be used for information purposes only, and is subject to change without prior notice. Alpine shall not be liable for technical or editorial errors or ommisions contained herein, nor for direct, incidental, consequential or any other damages resulting from furnishing, performance, or use of this information, even if Alpine Overhead Doors, Inc. has been advised of the possibility of such damages in advance. See the additional disclaimer in our Terms of Use. |
| Powder
Coating |
 |
|
Our
large selection of colors
make our doors decorative
and durable. |
| Standard
Colors |
| View | Download |
| Special
Effects |
| View | Download |
|
| |
2
3/4" Flat Slat |
| |
Double
Angle Bottom Bar |
| |
Structural
Guides |
|