Steel-Vision Security Grille 2017-07-20T13:17:44+00:00

Alpine® Steel-Vision® Security Grille

Perforated Rolling Doors

Product Features

  • Enjoy the benefits of a see-through security grille design with comfort and security

  • The Steel-Vision security roll up door can be motor or manually operated

  • This security storefront door accents the appearance of the doors & enhances building decor

Request A Quote

APPLICATION USE
Security Storefront Door, Office Window, Loading Dock Doors, Insect Protection Doors, Bug Screens, Mall Rolling Doors, Ventilation, Display Case.

BOTTOM BARS
Bottom Bars for the Security Roll Up Door can be Brass, Copper, Galvanized, Aluminum, Stainless Steel, Hot Rolled Steel, Powder Coated, Weather Strip , Pneumatic Edge, Electric Edge, Wireless Edge, Single Angle, Double Angle, Tubular, Extruded “T”, Slope Bar, Slide Lock.

BRACKET PLATES 
Bracket Plates for the Security Grille can be Brass, Copper, Hot Rolled A36, Stainless Steel, Aluminum, Galvanized, Powder Coated, Stop Lock Bearing, Internal Charge, Charge Wheel, Motor Prep., Chain Gearing, Thru-Wall Drop Plate, Round Bracket, Square Bracket, Hex Bracket, Single Gear Reducer, Double Gear Reducer.

COUNTERBALANCE ASSEMBLY
Assembly for Insect Protection Doors and Bug Screens can be Hot Rolled A36, Galvanized, Stainless Steel, Torsion Spring, Band Spring, Life Cycle 7.5M, Life Cycle 10M, Life Cycle 15M, Life Cycle 17.5M thru 400M, Collars, Welded Tabs, Taped Holes, Redi- Tube Motor, Thru-Shaft Push-up, Inside Charge, Lock Shaft Collar, Keyed, Bolted.

CURTAIN OPTIONS
Curtains for the Security Roll Up Door can be Galvanized, Stainless Steel, Aluminum, Powder Coated, Perforated, Mail Slot, Stamped Endlock, Cast Endlocks, Windlock Option, Teflon End Lock.

GUIDE MATERIAL
Security Storefront Door Guide Material can be Brass, Copper, Hot Rolled A36, Stainless Steel, Galvanized Steel, Powder Coated, Structural Angles, Roll Formed Angles, Chain Lock Box, Pin Locks, Loc-Tite Locks, Electric Interlock, Tube Mounting, Pack Out Angle, Flat Plate Mount.

HOOD/COVER
Insect Protection Doors and Bug Screens have hoods/covers that can be Brass, Copper, Galvanized, Stainless Steel, Aluminum, Galvalume, Prime Painted, Powder Coated, Lintel Seal, Back Fascia, Tension Cover, Operator Cover, Round, Square, Hex, Side End Cap, Motor Cover, T.O.C. Cover, F.O.C. Cover, F.O.W. Cover.

MATERIAL STYLE
The Security Grille can be 22 Gauge, 20 Gauge.

OPERATION OF DOOR
Security Storefront Gate can be Push-up, Chain, Motor, Hand Crank, Redi-Master, Redi-Hoist, Redi-Lift, Redi-Tube, Chain Gear Reducer, Euro-Drive.

Alpine® Steel-Vision® Security Grille

Perforated Rolling Doors

Below you will be able to download details for the security grille. The AutoCAD details and AutoCAD drawings are available as a PDF. Click here to request a quote. AutoCAD drawings and AutoCAD details for insect protection doors may be selected on the CAD FILES option to the right. The AutoCAD drawings and AutoCAD details comply with 08360, 08400 & 08330 construction specs for roll up doors. You’ll find useful information about these doors including both manual and motor operation as well as different mounting options.

Steel-Vision® insect protection doors comply with the 08330 construction spec. This security grille is a perforated rolling door that offers a clean, uncluttered view that eliminates the claustrophobic effect of being “closed-in”. Steel-Vision® security storefront doors are available in a variety of sizes and finishes, and are made of heavy gauge steel, making them both safe and secure. For warehouse and dock doors or insulated doors, please select the item from the product index.

To download rolling door Details (PDF), please click below.

AutoCAD Drawings, AutoCAD Details, Security Grille, Insect Protection Doors

AutoCAD Drawings, AutoCAD Details, Security Grille, Insect Protection Doors
AutoCAD Drawings, AutoCAD Details, Security Grille, Insect Protection Doors
AutoCAD Drawings, AutoCAD Details, Security Grille, Insect Protection Doors
AutoCAD Drawings, AutoCAD Details, Security Grille, Insect Protection Doors

The Steel-Vision® AutoCAD drawings and AutoCAD details are for informational purposes. They may change at any time. The CAD detail and CAD drawing reflect the options that are available to the architects and engineers compiling a drawing of this security grille to present to contractors.  The AutoCAD detail and AutoCAD drawing will be updated regularly. Alpine’s insect protection doors are built to last.

Alpine® Steel-Vision® Storefront Security Gate

Perforated Rolling Doors

To download Security Storefront Gate, Bug Screen, security doors, Division 8 specifications please click below.

3 Part Specifications (PDF) Adobe Acrobat Division 8, Security Storefront Gate, Bug Screen, security doors Division 8, Security Storefront Gate, Bug Screen, security doors
3 Part Specifications (DOC) Microsoft Word Division 8, Security Storefront Gate, Bug Screen, security doors

Model STEEL-VISION®
Perforated Curved or Flat Slats
Security Doors

NOTE: For Security Storefront Gate, Bug Screen, security doors, Division 8 specifications, architects must choose from a variety of options. The standard choice will be shown first in plain text followed by the options shown in [brackets] (Example “Finish: Galvanized [Powder coated] [Baked enamel]”). The specifier must make the appropriate choices for the bug screen and delete the others (Example: “Finish: Powder coated”).

GENERAL
1.01 SUMMARY of
Security Storefront Gate, Bug Screen, security doors, Division 8
A. This section includes: [Manual] or [Electric] operated Steel Perforated Rolling Door.
1. Cycle life: Design doors of standard construction for normal use of 10,000 cycles standard [up to 400,000 cycles].
B. Related Sections: Related to this section, but not limited to, the following (based on Master Format 2004):
1. Section 01660 – Product Storage and Handling Requirements.
2. Section 04220 – Concrete Unit Masonry.
3. Section 05120 – Structural Steel.
4. Section 06100 – Rough Carpentry.
5. Section 08310 – Access Doors and Panels.
6. Section 08710 – Door Hardware.
7. Section 09290 – Gypsum Board.
8. Section 09900 – Paints and Coatings.
9. Section 26000 – Electrical.

1.02 REFERENCES for Security Storefront Gate, Bug Screen, security doors, Division 8
A. ASTM A 653/A 653M – Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
B. ASTM A 36 – Standard Specification for Carbon Structural Steel, Hot Rolled Steel
C. ASTM A 123 – Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
D. ASTM A 312 – Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
E. ASTM A 240 – Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
F. ASTM A 276 – Standard Specification for Stainless Steel Bars and Shapes
G. ASTM B 209 – Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
H. ASTM B 221 – Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes

1.03 SUBMITTALS for Security Storefront Gate, Bug Screen, security doors, Division 8
A. Submit under provisions of Section 01300.
B. Product Data: Provide manufacturer’s standard details and catalog data. Provide installation instructions.
C. Shop Drawings: Furnish shop drawings for architect’s approval. Include elevation, sections, and details indicating dimensions, materials, finishes, conditions for anchorage and support of each door.
D. Submit manufacturer’s recommended operation, troubleshooting, and maintenance instructions.

1.04 QUALITY ASSURANCE FOR DIVISION 8 DOORS
A. Manufacturer: Rolling doors shall be manufactured by a firm with a minimum of five years experience.
B. Single-Source Responsibility: Manufacturer shall provide doors, tracks, motors, and accessories for each type of door. Secondary components shall come from a source acceptable to the manufacturer of the primary components.

1.05 DELIVERY, STORAGE, AND HANDLING OF Security Storefront Gate, Bug Screen, security doors, Division 8
A. Deliver materials in original packaging supplied by manufacturer with intact labels. Store materials away from harmful environmental conditions and construction.

1.06 WARRANTY FOR SECURITY STOREFRONT GATE
A. Door Warranty: Provide one year written warranty from date of installation against deficiencies due to defects in materials or workmanship. Installer agrees to repair or replace any defects in materials or workmanship.
B. Project Warranty: Refer to Conditions of the Contract for project warranty provisions.

PART 2 – PRODUCTS

2.01 MANUFACTURER FOR Security Storefront Gate, Bug Screen, security doors, Division 8
A. Manufacturer: Alpine Overhead Doors, Inc.; 8 Hulse Road Suite 1S, East Setauket, NY 11733. Telephone 800-257-4634 or 631-473-9300. Fax 631-642-0800.
B. Model: STEEL-VISION® Steel Perforated Rolling Door

2.02 MATERIALS FOR BUG SCREEN
A. Curtain:

1. Slats: Constructed of interlocking, roll-formed 4” curved [3” curved] [2 ¾” flat] [1 ¼” flat] perforated slats.
a) Material:
i) Galvanized steel, G90 coating exterior (G60 interior), Structural Quality Grade C, as per ASTM A 653/ A 653 M
Finish: Galvanized [Powder coated] [Baked enamel] (Minimum coating conforming with Coating Designation G-01 is required)
– OR –
ii) ASTM 240 Stainless steel 300 series
Finish: [Mill finish #2B] [#4 satin finish] b) Gauge: (Per manufacturer’s standard) Minimum 22 gauge [20, 18, 16] 2. [Vision Lite panels]: 6” by 1 ¼” oval cut out with clear acrylic windows.
3. Endlocks and Windlocks (as required):
a) Ductile cast iron, hot-dip galvanized [stamped] endlocks riveted (solid rivets, minimum 3/16” thick) to each end of alternate slats to prevent lateral movement and to limit slat deflection and bending stress. [Windlocks are dependent on windload and increase resistance to curtain jamming] 4. Bottom Bar: (Size dependent on dimensions per manufacturer’s standard)
a) Two roll formed angles which extend into guides, designed to reinforce curtain bottom. [Single angle] [Tubular] [Aluminum “T”] i) Galvanized Steel as per ASTM A 653/ A 653 M
Finish: Gray shop prime [Powder Coated] [Baked Enamel] – OR –
ii) ASTM 240 Stainless Steel 300 Series
Finish: [Mill finish #2B] [#4 satin finish] – OR –
iii) Aluminum
Finish: Mill Finish [Clear anodized] [Bronze anodized] [Black anodized] b) [Weatherstripping] (For double angle bottom bar): Neoprene astragal.
B. Guides of Security Storefront Gate, Bug Screen, security doors, Division 8:
1. Guides shall be designed using structural angles with a minimum thickness of 3/16”, minimum 1 ¼” slotted connections, and removable bellmouth curtain stops to allow for curtain maintenance without removal of guides. Bellmouth stops shall be flush with guide groove. Guides shall be fastened with minimum 3/8” bolts at minimum 24” o.c. [Roll formed guides also available] a) Material:
i) ASTM A 36 Carbon Structural Steel
Finish: Gray shop prime coat [ASTM A 123 Galvanized] [baked enamel paint] [powder coated].
– OR –
ii) ASTM 276 Stainless Steel 300 Series
Finish: [Mill finish #2B] [#4 finish satin] – OR –
iii) Extruded Aluminum
Finish: Mill Finish [Clear anodized] [Bronze anodized] [Black anodized] C. Door Support Brackets and Mounting Plates for Security Storefront Gate, Bug Screen, security doors, Division 8:
1. Steel plate not less than 1/4” thick. Provide ball bearings at rotating support points. Bolt plates to wall mounting angles with minimum 1/2″ fasteners. Plate supports counterbalance assembly and forms end enclosures.
a) Material:
i) ASTM A 36 Carbon Steel:
Finish: Gray shop prime coat [ASTM A 123 Galvanized] [Baked enamel paint] [Powder coated].
– OR –
ii) ASTM 240 Stainless Steel 300 Series
Finish: [Mill Finish #2B] – OR –
iii) Aluminum
Finish: Mill Finish [Clear anodized] [Bronze anodized] [Black anodized] b) [Stop Lock bearing]: To prevent door from free falling in the event drive operation fails.
D. Counterbalance Assembly for Security Storefront Gate, Bug Screen, security doors, Division 8: Torsion
1. Counterbalance assembly: Steel pipe barrel of a size capable of carrying a curtain load with a maximum deflection of 0.03” per foot of door width. Heat-treated helical torsion springs encased in a steel pipe and designed to include an overload factor of 25% to ensure minimum effort to operate. Sealed and prelubricated high speed ball bearing at rotating support points. Torsion spring charge wheel for applying spring torque and for future adjustments.
a) Material:
i) ASTM A 36 Carbon Structural Steel
Finish: Gray shop prime coat [A 123 Hot-Dip Galvanized] – OR –
ii) A 312 Stainless Steel 300 Series
Finish: Mill finish
b) Life Cycle: High Cycle springs designed to satisfy 10m through 400m life cycles. Consult engineering if height exceeds width for any cycle above 20m. (Cycle defined as one time opening and closing of door)
E. Hood for Security Storefront Gate, Bug Screen, security doors, Division 8:
1. 24 gauge steel [.040” aluminum]. Formed to fit the contour of the end brackets with reinforced top and bottom edges. Provide support bracing for doors wider than 20 feet at every 10 feet to prevent excessive sag. Fastened to end brackets.
2. Shape: Hexagon [square] [round] 3. Material:
a) Galvanized Steel as per ASTM A 653/ A 653 M
Finish: [Baked enamel paint] [Powder coated] – OR –
b) ASTM 240 Stainless Steel 300 Series:
Finish: [Mill finish #2B] [#4 satin finish] 4. [Fascia]: Galvanized [Stainless Steel] [Aluminum], provided where areas behind door hood are open. Materials and finish same as hood.
F. Locking:
1. Slide locks: Provide padlockable slide locks for latching and locking door on coil side bottom bar at each jamb extending into slots in guides. [Pin locks] (Electric Interlocks recommended with motorized doors only)
2. Manual chain hoist: Provide padlockable chain keeper on guide.
3. [Cylinder Locks]: For tubular bottom bars.

2.03 OPERATION OF Security Storefront Gate, Bug Screen, security doors, Division 8:
A. Opening/Closing: Manual push-up [Manual hand chain] [Manual hand crank] [Motor Operator].
B. [Manual hand chain]:
1. Provide chain hoist operator with endless steel chain, chain pocket wheel and guard, geared reduction unit, and chain keeper secured to guide.
C. [Manual hand crank]:
1. Provide crank hoist operator including crank gear box, steel crank drive shaft and geared reduction unit. Fabricate gear box to completely enclose operating mechanism and be oil-tight.
D. [Motor Operators]:
1. Choose ONE:
a) Medium-Duty, Alpine® Model Redi-Hoist™ driven by efficient V-belt primary drive with chain/sprocket secondary. Maximum ½ hp. For use on doors up to 10’ x 10’.
– OR –
b) Industrial-Duty, Alpine® Model Redi-Lift™ driven by heavy-duty V-belt with chain/sprocket secondary reduction. Optional auxiliary chain hoist. Maximum 1 hp. For use on doors up to 12’ x 12’.
– OR –
c) Heavy Industrial-Duty, Alpine® Model Redi-Master™ driven by heavy-duty worm gear in oil bath reduction. Standard auxiliary chain hoist. Standard ½ hp (maximum 3 hp)
– OR –
d) Redi-Tube® Tubular Motor with Built-In Manual Handcrank Overdrive. Auxiliary chain hoist not available. For use on doors up to 10’ x 8’.
– OR –
e) Redi-Midget® Gear Reduced Jackshaft Door Operator.
2. [Sensing Edges] (For double angle bottom bar): For motorized doors, sensing edges allow door to go up in case of obstruction. [Pneumatic Edge] [Electric Edge] [Wireless Edge].
a) Colors: Gray [Yellow] [Black] [White] [Yellow with black stripes] 2.04 Mounting:
1. Interior face mounted on prepared opening.
2. Interior mounted between jambs and under lintel in a prepared opening.
3. Exterior face mounted on prepared opening.

PART 3 – EXECUTION

3.01 EXAMINATION OF Security Storefront Gate, Bug Screen, security doors, Division 8
A. Verify that dimensions are correct and project conditions are in accordance with manufacturer’s installation instructions; do not proceed with installation until unacceptable conditions have been corrected.

3.02 INSTALLATION
A. Install units in accordance with manufacturer’s instructions.
B. Ensure that units are installed plumb and true, free of warp or twist, and within tolerances specified by manufacturer for smooth operation.

3.03 FIELD TESTING OF Security Storefront Gate, Bug Screen, security doors, Division 8
A. Test doors for regular operation.

3.04 DEMONSTRATION
A. Instruct the Owner’s personnel in correct operation and maintenance of units.

3.05 ADJUST AND CLEAN
A. Clean units in accordance with manufacturer’s instructions.
B. Restore slight blemishes in finishes in accordance with manufacturer’s instructions to match original finish. Remove and provide new units where repairs are not acceptable to the Architect

Security Grille, Insect Protection Doors, Bug Screens, Security Roll Up Door

2 3/4″ Perforated Flat Slats

Security Grille, Insect Protection Doors, Bug Screens, Security Roll Up Door

Double Angle Bottom Bar

Security Grille, Insect Protection Doors, Bug Screens, Security Roll Up Door

Structural Guides

Alpine’s Steel-Vision® perforated doors offer a clean, uncluttered view that eliminates the claustrophobic effect of being “closed-in”. Steel-Vision® security storefront doors are available in a variety of sizes and finishes, and are made of heavy gauge steel, making them both safe and secure. These security grilles are excellent bug screens and insect protection doors.

Alpine Steel-Vision® security storefront gate curtains come with either 2 3/4″ flat slats interlocking slats. The security gates can be manually or motor operated. All operators can be adapted to specific conditions. Locking units can be provided depending on the type of security roll up door operation. Alpine rolling steel doors and security grilles are durable, sturdy and economical to install and maintain.