Alpine® Dawn 4" Door® Security Doors

 

To download security door specifications for security doors and self storage doors please click below.

3 Part Specifications (PDF) Adobe Acrobat

Security Doors, Self-Storage Doors - Security Door Specifications Security Doors, Self-Storage Doors - Security Door Specifications

3 Part Specifications (DOC) Microsoft Word

Download 3 Part Specifications (DOC) for Security Doors, Self-Storage Doors - Security Door Specifications  

 

Model DAWN-4”-DOOR®
Curved Slats
Rolling Service Door

NOTE: For security door specifications for self-storage doors, architects must choose from a variety of options. The standard choice will be shown first in plain text followed by the options shown in [brackets] (Example “Finish: Galvanized [Powder coated] [Baked enamel]”). The specifier must make the appropriate choices and delete the others (Example: “Finish: Powder coated”) according to your rolling service door needs..

GENERAL

1.01 SUMMARY OF SECURITY DOORS
A. This section includes: [Manual] or [Electric] operated Economy Box Spring Door.
1. Cycle life: Design doors of standard construction for use up to 12,000 cycles.
2. Dimensions: To be a manual push-up, door must not exceed 120 ft.²
B. Related Sections: Related to this section, but not limited to, the following (based on Master Format 2004):
1. Section 01660 – Product Storage and Handling Requirements.
2. Section 04220 – Concrete Unit Masonry.
3. Section 05120 – Structural Steel.
4. Section 06100 – Rough Carpentry.
5. Section 08310 – Access Doors and Panels.
6. Section 08710 – Door Hardware.
7. Section 09290 – Gypsum Board.
8. Section 09900 – Paints and Coatings.
9. Section 26000 – Electrical.

1.02 REFERENCES OF SELF-STORAGE DOORS
A. ASTM A 653/A 653M – Standard Security Door Specifications for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
B. ASTM A 1018/A 1018M – Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formidability
C. ASTM A 123 – Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
D. ASTM A 312 – Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
E. ASTM A 240 – Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
F. ASTM A 276 – Standard Specification for Stainless Steel Bars and Shapes
G. ASTM B 209 – Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
H. ASTM B 221 – Standard Security Door Specifications for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes

1.03 SUBMITTALS
A. Submit under provisions of Section 01300.
B. Product Data: Provide manufacturer’s standard details and catalog data. Provide installation instructions.
C. Shop Drawings: Furnish shop drawings for architect’s approval. Include elevation, sections, and details indicating dimensions, materials, finishes, conditions for anchorage and support of each door.
D. Submit manufacturer’s recommended operation, troubleshooting, and maintenance instructions.

1.04 QUALITY ASSURANCE OF SECURITY DOORS
A. Manufacturer: Rolling doors shall be manufactured by a firm with a minimum of five years experience.
B. Single-Source Responsibility: Manufacturer shall provide doors, tracks, motors, and accessories for each type of door. Secondary components shall come from a source acceptable to the manufacturer of the primary components.

1.05 DELIVERY, STORAGE, AND HANDLING
A. Deliver materials in original packaging supplied by manufacturer with intact labels. Store materials away from harmful environmental conditions and construction.

1.06 WARRANTY OF SELF-STORAGE DOORS
A. Door Warranty: Provide one year written warranty from date of installation against deficiencies due to defects in materials or workmanship. Installer agrees to repair or replace any defects in materials or workmanship.
B. Project Warranty: Refer to Conditions of the Contract for project warranty provisions.

PART 2 – PRODUCTS

2.01 MANUFACTURER OF SECURITY DOORS
A. Manufacturer: Alpine Overhead Doors, Inc.; 8 Hulse Road Suite 1S, East Setauket, NY 11733. Telephone 800-257-4634 or 631-473-9300. Fax 631-642-0800.
B. Model: DAWN 4 DOOR® Rolling Service Door

2.02 MATERIALS FOR SELF-STORAGE DOORS
A. Curtain:

1. Slats: Constructed of interlocking, roll-formed 4” curve [4” curve perforated] slats. (For grilles, see specs for Dawn Grille)
a) Material of security door specifications:
i) Galvanized steel, G90 coating exterior (G60 interior), Structural Quality Grade C, as per ASTM A 653/ A 653 M
Finish: Galvanized [Powder coated] [Baked enamel] (Minimum coating conforming with Coating Designation G-01 is required)
– OR –
ii) ASTM 240 Stainless steel 300 series
Finish: [Mill finish #2B] [#4 satin finish]
– OR –
iii) Aluminum
Finish: Mill Finish [Clear anodized] [Bronze anodized] [Black anodized]
b) Gauge: (Per manufacturer’s standard)
i) Galvanized/Stainless: Minimum 22 gauge as manufacturer standard [20, 18, 16 gauge].
ii) Aluminum: Minimum 0.040” thick.
2. [Vision Lite panels] (for flat slats only): Provide 6” by 1 ¼” oval acrylic panes set into curtain. (Choose number and placement)
3. Endlocks:
a) Stamped, hot-dip galvanized endlocks riveted (solid rivets, minimum 3/8” thick) to each end of alternate slats to prevent lateral movement and to limit slat deflection and bending stress.
4. Bottom Bar: (Size dependent on dimensions per manufacturer’s standard)
a) Extruded aluminum bottom bar
i) Aluminum
Finish: Mill Finish [Clear anodized] [Bronze anodized] [Black anodized]
b) [Tubular Aluminum bottom bar]
Finish: Mill Finish [Clear anodized] [Bronze anodized] [Black anodized]
B. Guides for Security Doors:
1. Guides shall be roll formed consisting of 13 gauge steel, steel mounting angles, expansion slotted connections, and removable curtain stops to allow for curtain maintenance without removal of guides.
a) Material:
i) ASTM A 1018/A 1018 M Steel
Finish: Gray shop prime coat [ASTM A 123 Galvanized] [baked enamel paint] [powder coated].
C. Door Support Brackets and Mounting Plates for self-storage doors:
1. Security door specifications call for 13 gauge steel stamped brackets, welded to guides. Plate supports counterbalance assembly and forms end enclosures.
a) Material:
i) ASTM A 1018/A 1018 M Steel:
Finish: Gray shop prime coat [ASTM A 123 Galvanized] [Baked enamel paint] [Powder coated].
D. Counterbalance Assembly: Band Spring
1. Consists of flat blue spring steel wrapped around a 2” pipe shaft and mounted into a spring box.
E. Hood:
1. 24 gauge steel [.040” aluminum]. Formed to fit the contour of the end brackets with reinforced top and bottom edges.
2. Shape: Hexagon [square] [round]
3. Material:
a) Galvanized Steel as per ASTM A 653/ A 653 M
Finish: [Baked enamel paint] [Powder coated]
– OR –
b) ASTM 240 Stainless Steel 300 Series:
Finish: [Mill finish #2B] [#4 satin finish]
– OR –
c) Aluminum
Finish: Mill Finish [Clear anodized] [Bronze anodized] [Black anodized]
4. [Fascia]: Galvanized [Stainless Steel] [Aluminum], provided where areas behind door hood are open. Materials and finish same as hood.
F. Locking:
1. Provide hasps and pins, prepared for padlocks on coil side. [Slide locks]

2.03 Operation according to security door specifications:
A. Opening/Closing: Manual push-up [Motor Operator].
B. [Motor Operator]:
1. Alpine Redi-Central® 115 V, 60 Hz, single phase motor.

2.04 Mounting:
1. Interior face mounted on prepared opening.
2. Interior mounted between jambs and under lintel in a prepared opening.
3. Exterior face mounted on prepared opening.

PART 3 – EXECUTION

3.01 EXAMINATION
A. Verify that dimensions are correct and project conditions are in accordance with manufacturer’s installation instructions; do not proceed with installation until unacceptable conditions have been corrected.

3.02 INSTALLATION OF SECURITY DOORS
A. Install units in accordance with manufacturer’s instructions.
B. Ensure that units are installed plumb and true, free of warp or twist, and within tolerances specified by manufacturer for smooth operation.

3.03 FIELD TESTING
A. Test doors for regular operation.

3.04 DEMONSTRATION OF SELF-STORAGE DOORS
A. Instruct the Owner’s personnel in correct operation and maintenance of units.

3.05 ADJUST AND CLEAN
A. Clean units in accordance with manufacturer’s instructions and security door specifications. Restore slight blemishes in finishes in accordance with manufacturer’s instructions to match original finish. Remove and provide new units where repairs are not acceptable to the Architect.

Powder Coating

Our large selection of colors make our doors decorative and durable.

Standard Colors

View | Download

Special Effects

View | Download

Security Doors, Self-Storage Doors - Security Door Specifications

4″ Curve

 

Security Doors, Self-Storage Doors - Security Door Specifications

Aluminum “T” Bottom Bar

 

Security Doors, Self-Storage Doors - Security Door Specifications

Roll-Formed Guide

 

 

Contact us today to find out which Alpine® solution is right for you!

Disclaimer: All data provided on this website is to be used for information purposes only, and is subject to change without prior notice. Alpine shall not be liable for technical or editorial errors or ommisions contained herein, nor for direct, incidental, consequential or any other damages resulting from furnishing, performance, or use of this information, even if Alpine Overhead Doors, Inc. has been advised of the possibility of such damages in advance. See the additional disclaimer in our Terms of Use.