Wood Counter Shutter 2017-11-18T10:07:36+00:00

Wood Counter Shutter

Wood Counter Shutters add beauty and security.

These Wood counter shutters and wood doors are ideal for office windows, school cafeterias, healthcare facilities, hospitals and airport concession displays. Wood shutters offer the richness and beauty of wood with the practicality of a roll up door.

Alpine’s wood rolling doors are constructed with the highest quality material and the latest in technical innovation to ensure that each roll up wood door exceeds the requirements it is meant to achieve. Alpine’s winning team of employees work diligently with the customers beyond the sale. We show our customers that their satisfaction is our top priority. Alpine’s quality and workmanship with wooden counter shutters is proven throughout the door industry. Our hands-on approach to every job ensures customer satisfaction.

Request A Quote

Each roll up wood counter door is built to the exact opening size requirements for your specific project. When the wood shutter is rolled up the curtain is fully stored in an overhead coil and is fully supported by the side guides. These wood rolling doors are highly durable and are designed to withstand heavy commercial use. Best of all, little to no maintenance is required.

1 1/2″ Wooden Slat

5 5/8″ Wooden Bottom Bar

Door Construction

CURTAIN The slats for wooden counter shutters and wood doors are 1-3/4” high by 1/2” thick and are held together by cables that run through vertical holes drilled in each slat at 22” intervals. Slats are also available in 1-3/4” high by 3/4” thick.

GUIDES Wood overhead doors and wood shutters have guides that are 1-1/2” by 4” for between jamb mounting and 2-13/16” by 3” for face of wall mounting. Aluminum extruded guides are 1/8” thick, 1-1/4” by 1-1/2” for between jamb and 2” by 3” for face of wll mounting applications.

COUNTERBALANCE ASSEMBLY Counter balance spring for the roll up wood door is housed in either a 2” or a 4” diameter pipe. Springs are helical torsion and are designed to withstand a 25% overload.

CABLE  Cable for the wood doors are plastic coated aviation, 3/32” diameter cable with a tensile strength of 480 pounds. The cable for wood shutters is anchored to the bottom bar with a compression spring that applies tension to the cable. The other end of the cable is securely fastened to the top slat of the curtain.

HOOD A coil enclosure (Hood) is available for these wooden counter shutters in wood matching the curtain and guides. It is constructed of 3/4” veneer plywood. Hoods are also available in sheet metal (steel or aluminum).

BOTTOM BAR Bottom bar of the wood overhead doors and wood rolling doors is constructed of solid wood 5-5/8” high by 1-5/8” thick.

LOCKING Deadbolt lock installed at both jambs of the wood shutters and wood doors. Cylinder locks are also available.

BRACKET PLATES Bracket plates for the wooden counter shutters  and wood rolling doors are fabricated of 1/8” or 3/16” thick steel.

OPERATION Wood overhead doors are available in push-up, hand chain, or motor operation. For optional features see the motor operators section in this catalog. Please See Alpine’s Motor Operator Page (www.alpinedoors.com/motoroperators.htm)

ACCESS CONTROLS: Optional control stations are available for this roll up wood door as Push Button Control Station or Key Control Stations. Special Control Stations are also available, please consult factory. Please See Alpine’s Access Contols Page (www.alpinedoors.com/accesscontrols.htm) Call Alpine today to learn more about these wood overhead doors!

Contact us today to find out which Alpine® solution is right for you!

Disclaimer: All data provided on this website is to be used for information purposes only, and is subject to change without prior notice. Alpine shall not be liable for technical or editorial errors or ommisions contained herein, nor for direct, incidental, consequential or any other damages resulting from furnishing, performance, or use of this information, even if Alpine Overhead Doors, Inc. has been advised of the possibility of such damages in advance. See the additional disclaimer in our Terms of Use.

Alpine® Wooden Counter Shutters

Quality Wood Overhead Doors

AutoCAD drawings and AutoCAD details may be selected on the wood overhead doors. AutoCAD drawings and AutoCAD details for wood roll up doors may be selected on the CAD FILES option to the right or click here to request a quote on Quality rolling shutters. This roll up wood door may be viewed in PDF format below. For marine doors please refer to the item on the product screen. The AutoCAD drawings and AutoCAD details for the wood rolling shutters comply with 08000 & 08330 construction specification.

Alpine’s wood rolling shutters are constructed with the highest quality material and the latest in technical innovation to ensure that all wood rolling shutters exceed the requirements it is meant to achieve. Alpine’s quality and workmanship with wood roll up doors is proven throughout the door industry. These wooden overhead doors are ideal for office windows, school cafeterias, healthcare facilities, hospitals and airport concession displays.

To download details (PDF), please click below.

Wood Overhead Doors, Wood Roll Up Doors, Wood Rolling Shutters

Select the mounting condition of your roll up wood door:
Wood Overhead Doors, Wood Roll Up Doors, Wood Rolling Shutters
Wood Overhead Doors, Wood Roll Up Doors, Wood Rolling Shutters
Wood Overhead Doors, Wood Roll Up Doors, Wood Rolling Shutters
Wood Overhead Doors, Wood Roll Up Doors, Wood Rolling Shutters

Wood Overhead doors AutoCAD drawing and AutoCAD details are for informational purposes. They may change at any time. The CAD detail and CAD drawing reflect the options that are available to the architects and engineers compiling a drawing of wood roll up doors to present to contractors.  The AutoCAD detail and AutoCAD drawing will be updated regularly. Alpine’s wood rolling shutters  are unmatched in the industry!

Call Alpine today to speak with one of our dedicated employees to discover the wooden rolling shutters that are right for you!

Disclaimer: All data provided on this website is to be used for information purposes only, and is subject to change without prior notice. Alpine shall not be liable for technical or editorial errors or ommisions contained herein, nor for direct, incidental, consequential or any other damages resulting from furnishing, performance, or use of this information, even if Alpine Overhead Doors, Inc. has been advised of the possibility of such damages in advance. See the additional disclaimer in our Terms of Use.

Alpine® Wooden Counter Shutters and Window Shutters

Quality Wood Doors With A Traditional Design

To download specifications for wood doors for window shutters, please click below.

3 Part Specifications (PDF) Adobe Acrobat Download 3 Part Specifications (PDF) Get Adobe Reader
3 Part Specifications (DOC) Microsoft Word Download 3 Part Specifications (DOC)

Model Wood doors, window Shutters
Wood Flat Slats
Wood Roll Down Doors

NOTE: For window shutter specifications, architects must choose from a variety of options for these types of  wood doors. The standard choice will be shown first in plain text followed by the options shown in [brackets] (Example “Finish: Wood [Cherry] [Oak]”). The specifier must make the appropriate choices for their wood window specifications and delete the others (Example: “Finish: Wood Cherry”).

GENERAL

1.01 SUMMARY for Wood Doors, Window Shutter, Wood Window Specifications, Wood Roll Down Doors
A. This section includes: [Manual] or [Electric] operated Rolling Wooden Counter-Shutter.
1. These rolling doors are suitable for widths of up to 15’ 9” and up to 10’ 0” heights. Manual operation is acceptable up to 42 square feet. Wood Doors exceeding those dimensions should have a Hand Crank or Motor Operator.
B. Related Sections: Related to this section, but not limited to, the following (based on Master Format 2004):
1. Section 01660 – Product Storage and Handling Requirements.
2. Section 04220 – Concrete Unit Masonry.
3. Section 05120 – Structural Steel.
4. Section 06100 – Rough Carpentry.
5. Section 08310 – Access wood Doors and Panels.
6. Section 08710 – Rolling Door Hardware.
7. Section 09290 – Gypsum Board.
8. Section 09900 – Paints and Coatings.
9. Section 26000 – Electrical.

1.02 REFERENCES for Wood Doors, Window Shutter, Wood Window Specifications, Wood Roll Down Doors
A. ASTM A 653/A 653M – Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
B. ASTM A 36 – Standard Specification for Carbon Structural Steel, Hot Rolled Steel
C. ASTM A 123 – Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
D. ASTM A 312 – Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
E. ASTM A 240 – Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
F. ASTM A 276 – Standard Specification for Stainless Steel Bars and Shapesof wood doors
G. ASTM B 209 – Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
H. ASTM B 221 – Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes of rolling doors

1.03 SUBMITTALS for Wood Doors, Window Shutter, Wood Window Specifications, Wood Roll Down Doors
A. Submit under provisions of Section 01300.
B. Product Data: Provide standard drawing details and catalog data of wood doors. Provide installation instructions.
C. Shop Drawings: Furnish shop drawings for architect’s approval. Include elevation, sections, and details indicating dimensions, materials, finishes, conditions for anchorage and support of each rolling door.
D. Submit manufacturer’s recommended operation, troubleshooting, and maintenance instructions of wood doors.

1.04 QUALITY ASSURANCE FOR THE WINDOW SHUTTER
A. Manufacturer: Rolling doors shall be manufactured by a firm with a minimum of five years experience.
B. Single-Source Responsibility: Manufacturer shall provide doors, tracks, motors, and accessories for each type of door. Secondary components shall come from a source acceptable to the rolling door manufacturer of the primary components.

1.05 DELIVERY, STORAGE, AND HANDLING OF WOOD ROLL DOWN DOORS
A. Deliver materials in original packaging supplied by manufacturer with intact labels. Store materials away from harmful environmental conditions and construction.

1.06 WARRANTY of Wood Doors, Window Shutter, Wood Window Specifications, Wood Roll Down Doors
A. Door Warranty: Provide one year written warranty from date of installation against deficiencies due to defects in materials or workmanship of wood doors. Installer agrees to repair or replace any defects in materials or workmanship.
B. Project Warranty: Refer to Conditions of the Contract for project warranty provisions.

PART 2 – PRODUCTS
A. Alpine Overhead Doors, Inc.; 8 Hulse Road Suite 1S, East Setauket, NY 11733. Telephone 800-257-4634 or 631-473-9300. Fax 631-642-0800.
B. Model: WOODEN COUNTER-SHUT Roll down doors

2.02 MATERIALS FOR WOOD WINDOW SPECIFICATIONS
A. Curtain for Wood Doors:
1. Slats: Constructed of interlocking, 1-3/4” x ½” thick wooden slats. They are held together by cables that run through vertical holes drilled in each slat at 22” intervals. Slats are also available in [1-3/4” x ¾” thick].
2. Bottom Bar: Bottom Bar of curtain assembly is constructed of solid wood 5-5/8” x 1-5/8” thick with a deadbolt lock installed at both jambs. [Cylinder locks] are also available.
3. Cable: Plastic coated aviation cable. Diameter is 3/32” with a tensile strength of 480 pounds. The cable is anchored to the bottom bar with a compression spring that applies tension to the cable. The other end of the cable is securely fastened to the top slat of the curtain on the wood doors.
B. Guides for Window Shutter:
1. Guides: Constructed of wood. Materials are 1-1/2” x 4” for between jamb mounting. Materials are 2-13/16” x 3” for face of wall mounting. Guides are also available in [Aluminum: Extruded 1/8” material thickness and measure 1-1/4” x 1-1/2” for between jamb and 2” x 3” thick for mounting to face of wall].

C. Door Support Brackets and Mounting Plates for Wood Doors, Window Shutter, Wood Window Specifications, Wood Roll Down Doors:
1. Bracket plates: Material fabricated from 1/8” or [3/16”] thick steel.
D. Counterbalance Assembly: Torsion
1. Counterbalance assembly: Spring is housed in either a 2” or [4”] diameter pipe. Springs are helical torsion and are designed to withstand a 25% overload.
E. Hood of Wood Roll Down Doors:
1. Hood: A coil enclosure (hood) is available in wood matching the curtains and guides. The rolling door is constructed out of ¾” veneer plywood. Hoods are also available in sheet metal [steel] [aluminum].
2. Shape: Square
F. Locking of Wood Roll Down Shutter:
1. Thub turn locks: Placed on [right] [left] [both] sides. Located at [coil side] or [opposite coil side].
2. Key Cylinders: Placed on [right] [left] [both] sides. Located at [coil side] or [opposite coil side].
3. Best Core Key Cylinders: Placed on [right] [left] [both] sides. Located at [coil side] or [opposite coil side].

2.03 OPERATION OF WOOD DOORS:
A. Opening/Closing: Manual push-up [Manual hand crank] [Motor Operator].
B. [Manual hand crank]:
1. Provide crank hoist operator including crank gear box, steel crank drive shaft and geared reduction unit. Fabricate gear box to completely enclose operating mechanism and be oil-tight.
C. [Motor Operators]:
1. Choose ONE:
a) Tubular Motor.
– OR –
b) Gear Motor Operator.
2. [Sensing Edges] : For motorized doors, sensing edges allow door to go up in case of obstruction. [Pneumatic Edge] [Electric Edge] [Wireless Edge].
a) Colors: Gray [Yellow] [Black] [White] [Yellow with black stripes]

2.04 Mounting of Wood Doors, Window Shutter, Wood Window Specifications, Wood Roll Down Doors:
1. Interior face mounted on prepared opening.
2. Interior mounted between jambs and under lintel in a prepared opening.
3. Exterior face mounted on prepared opening.

PART 3 – EXECUTION

3.01 EXAMINATION OF WOOD WINDOW SPECIFICATIONS
A. Verify that dimensions are correct and project conditions are in accordance with manufacturer’s installation instructions; do not proceed with installation until unacceptable conditions have been corrected.

3.02 INSTALLATION OF Wood Doors, Window Shutter, Wood Window Specifications, Wood Roll Down Doors
A. Install units in accordance with manufacturer’s instructions.
B. Ensure that units are installed plumb and true, free of warp or twist, and within tolerances specified by manufacturer for smooth operation.
C. Preparation for opening and installation of fire door to be in strict compliance with NPFA-80.

3.03 FIELD TESTING of Wood Doors, Window Shutter, Wood Window Specifications, Wood Roll Down Doors
A. Test rolling doors for regular operation.

3.04 DEMONSTRATION OF WOOD DOORS
A. Instruct the Owner’s personnel in correct operation and maintenance of units.

3.05 ADJUST AND CLEAN all Wood Doors, Window Shutter, Wood Window Specifications, Wood Roll Down Doors
A. Clean units in accordance with manufacturer’s instructions.
B. Restore slight blemishes in finishes in accordance with manufacturer’s instructions to match original finish. Remove and provide new units where repairs are not acceptable to the Architect.

Disclaimer: All data provided on this website is to be used for information purposes only, and is subject to change without prior notice. Alpine shall not be liable for technical or editorial errors or ommisions contained herein, nor for direct, incidental, consequential or any other damages resulting from furnishing, performance, or use of this information, even if Alpine Overhead Doors, Inc. has been advised of the possibility of such damages in advance. See the additional disclaimer in our Terms of Use.